|
In this video you will learn how to make a simple RGB LED Propeller Display
Using Arduino Nano
Components used in this project:
Arduino NANO = 1
Common anode RGB LED = 5
220 ohm resistor = 15
2.2k ohm resistor = 8
BC557B transistor = 5
BC547B transistor = 3
Hall sensor w130/44E/A3144 etc. = 1
3.7V Lipo Battery = 1
PCB = 1
Mini on/off switch = 1
8mm x 3mm neodymium magnet = 2
You can download Arduino Code
HERE
If you like this video, please Subscribe for more new videos.
Click Here For More Video Tutorials
|
